Hitachi Dynamic Link Manager Software Users Guide for VMWare

[-s]
To Display the Format of the Online Operation
dlnkmgr [-s host-name -u user-name -p password] online
-help
Parameters
To place paths Online
-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because online is always used for paths, so it
is assumed.
Specify the paths to be taken online by using the -cha, -pathid, or -
hbaportwwn parameter. If you do not specify any of these parameters,
the command will place all the offline paths online. If there is a path that
cannot be placed online, a message asks whether you would like to
continue processing. To ignore the offline path that cannot be placed
online and to continue processing, enter y. To stop the processing, enter
n.
-cha -pathid AutoPATH_ID
Use this parameter to simultaneously place online all paths that pass
through a specific CHA port. The command will place online all paths that
pass through the CHA port in the path specified by the -pathid
parameter. Paths that pass through a specific physical CHA port on a
physical storage system will be online.
Specify the current AutoPATH_ID of the target path, which is displayed by
using the view operation. For details about the view operation, see
view
(Displays Information) on page 6-25. Leading zeros can be omitted
(000001 and 1 indicate the same AutoPATH_ID); however, when the
target AutoPATH_ID is 000000, enter 000000 or 0 for the parameter
value.
AutoPATH_IDs are re-assigned every time the host is restarted. Always
make sure that you use the view operation to find the current
AutoPATH_ID of the target path, before executing the online operation.
Example
The following example shows how to place online the paths connected
to the CHA port 0A. In this example, a path whose AutoPATH_ID is
000002 is connected to the target CHA port:
When the confirmation message is displayed, the user enters y to
continue, or n to cancel the operation.
PROMPT>dlnkmgr online -cha -pathid 000002
KAPL01057-I All the paths which pass the specified CHA port
will be changed to the Online status. Is this OK? [y/n]:y
6-12
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide