HP VPN Firewall Appliances Network Management Configuration Guide

332
Configuring static routing
The term "router" in this document refers to both routers and routing-capable firewalls and firewall
modules.
Static routes are manually configured. If a network's topology is simple, you only need to configure static
routes for the network to work correctly.
Static routes cannot adapt to network topology changes. If a fault or a topological change occurs in the
network, the network administrator must modify the static routes manually.
Configuring a static route in the Web interface
Configuring static routes
1. Select Network > Routing Management > Static Routing from the navigation tree.
The static route configuration page appears.
Figure 237 Static route configuration page
2. Click Add.
The page for configuring a static route appears.
Figure 238 Creating a static route
3. Create a static route as described in Table 42.
4. Click Apply.