HP VPN Firewall Appliances Network Management Configuration Guide

634
path have an (S, G) entry. You can use the display pim routing-table command to display the
PIM routing table information on the routers. For example:
# Display PIM routing table information on Router A.
[RouterA] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: Pos5/0
Upstream neighbor: 192.168.9.2
RPF prime neighbor: 192.168.9.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: igmp, UpTime: 00:13:46, Expires: 00:03:06
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:00:42
Upstream interface: Ethernet1/2
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:03:06
The information on Router B and Router C is similar to that on Router A.
# Display PIM routing table information on the firewall.
[Firewall] display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:00:42
Upstream interface: GigabitEthernet0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/3
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:02:26
# Display PIM routing table information on Router D.