HP Serviceguard for Linux Version A.11.20.00 Deployment Guide, August 2012

The Serviceguard for Linux SNMP subagent requires the lm_sensors and net-snmp packages.

lm_sensors must be installed before net-snmp.

1. To check if lm_sensors is installed, run the following command:

rpm –qa | fgrep lm_sensors

2. If not installed, locate the lm_sensors rpm on the DVD under the Server directory, and install

it. For example:

rpm –ivh lm_sensors-2.10.7-9.el5.x86_64.rpm

3. To check if net-snmp is installed, run the following command:

rpm –qa | fgrep net-snmp

NOTE: By default, net-snmp-libs is already installed. Inspect the output carefully to determine

net-snmp-5.3.2.2-14.el5 , for example, is installed.

4. If not installed, locate the net-snmp rpm on the DVD under the Server directory, and install it.

For example:

rpm –ivh net-snmp-5.3.2.2-14.el5.x86_64.rpm

The libXp package is required for Serviceguard Manager.

1. To check if libXp is installed, run the following command:

rpm –qa | fgrep libXp-

2. If not installed, locate the libXp rpm on the DVD under the Server directory, and install it. For

example:

rpm -ihv libXp-1.0.0-8.1.el5.i386.rpm

The Serviceguard CIM provider requires the tog-pegasus package.

1. To check if tog-pegasus is installed, run the following command:

rpm –qa | fgrep tog-pegasus

2. If not installed, locate the tog-pegasus rpm on the DVD under the Server directory, and install it.

For example:

rpm –ivh tog-pegasus-2.9.1-2.el5_5.1.x86_64.rpm

Storage Array Configuration

Please refer to 3PAR configuration guide for more details:

HP 3PAR InForm Software -> 3PAR InForm® OS 2.2.4 CLI Administrator’s Manual