Using the HP DTC Manager/UX

Configuring a DTC CPU/LAN or LAN board with

dtcconfig

This chapter describes how to use the dtcconfig utility to conﬁgure the CPU/LAN

or LAN board of a DTC (the global DTC parameters). These procedures are based

on the Modify DTC Configuration menu that provides functions to modify a single

DTC.

Note The procedures in this chapter presume that you have added at least one DTC to the

list of conﬁgured DTCs. It is also presumed that you are familiar with the basic use

of the dtcconfig menus and function keys as described in chapter 4.

If you want to modify multiple DTC conﬁgurations at the same time, use the

dtcmodifyconfs command (as described in chapter 10).