Using the HP DTC Manager/UX
62
Configuring CPU/LAN or LAN board parameters
7
Configuring CPU/LAN or LAN board parameters
You must configure the CPU/LAN or LAN Board in order to change the global
configuration of a single DTC.
When configuring the CPU/LAN or LAN Board, you can change the following
parameters for the specified DTCs:
• LAN addresses which include:
• DTC IP address
• DTC node name
• Global parameters which include:
• event logging classes
• DTC user interface timeout
• DTC user prompt
• DTC user welcome message
• Enable DTCDF access
• DTCDF password
• TCP parameters which are TCP timers that may need to be altered for extended
LAN configurations
• DNS/IP parameters which include:
• default DNS (domain name server) and backups
• default IP router addresses and backups
• SNMP authorization filters which include:
• your network's SNMP management nodes, the information that these nodes
can request and the rights of access to the SNMP MIB data
• SNMP/MIB data parameters which include:
• the SNMP-specific data to be stored on the DTC
• DTC management protocol parameters which include:
• the DTC management protocol parameters that may need to be altered for
traffic over LANs with bridges