HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Indicates whether the value output to threshold2 is the value determined by the
storage system.
If the storage system is P9500 and poolFunction is 5, either of the following
values is output:
• 0: Value determined by the storage system
• 1: Value set by the user
This information is unknown or invalid for other cases (-1 is output).
threshold2Mode
Capacity of the pool (KB)
When poolFunction is 3 or 5, this value does not match the total capacity of
the pool volumes because the pool of Snapshot or Thin Provisioning uses a control
area.
capacityInKB
Unused capacity of the pool (KB)
For example, for XP24000/XP20000, when poolFunction is 5, the unused
capacity of the pool for Thin Provisioning Software is output.
freeCapacityInKB
Usage rate of the pool
For example, for XP24000/XP20000, when poolFunction is 5, the usage rate
of the pool for Thin Provisioning Software is output.
usageRate
Number of pool volumes
For example, for XP24000/XP20000, when poolFunction is 5, the number of
pool volumes for Thin Provisioning Software is output.
numberOfPoolVols
Number of virtual volumes assigned to the pool
For example, for XP24000/XP20000, when poolFunction is 5, the number of
volumes for Thin Provisioning Software assigned to the pool for Thin Provisioning
Software is output.
numberOfVVols
Total capacity of the virtual volumes assigned to the pool (KB)
For example, for XP24000/XP20000, when poolFunction is 5, the total
capacity of the volumes for Thin Provisioning Software assigned to the pool for
Thin Provisioning Software is output.
capacityOfVVolsInKB
CLPR number of the pool
The CLPR number is output for the pool that corresponds to the function type output
to poolFunction.
clprNumber
Currently, this information does not apply to storage systems.
raidLevel
Currently, this information does not apply to storage systems.
combination
Currently, this information does not apply to storage systems (-1 is output).volAlertNotice
Over-provisioning percent (%)
If the storage system is P9500 or XP24000/XP20000 and poolFunction is 5,
the ratio of the total size of all volumes for Thin Provisioning Software compared
to the pool size for Thin Provisioning Software is output.
This value is output as a whole number.
This information is invalid for other cases (-1 is output).
overProvisioningPer-
cent
CLI Reference Guide 333