HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

NOTE:
• For P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or XP1024/XP128, the capacity
of LDEV to be created will be larger than the specified capacity.
• For P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or XP1024/XP128, you cannot
create an LDEV that is the same size as the unused capacity of the parity group, because the
control area is created on the storage system side.
• For P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or XP1024/XP128, the SSID
must be set before an LDEV and LU are created. For details about the SSID, see the manual for
each storage system.
• For P9500 or XP24000/XP20000, logical units cannot be created in parity groups with chassis
numbers from 65 to 96, or from 16485 to 16516. Parity groups with chassis numbers from 65
to 96, or from 16485 to 16516 are indicated as V-VOLs.
• For XP12000/XP10000/SVS200, logical units cannot be created in parity groups with chassis
numbers from 65 to 96. Array groups with chassis numbers from 65 to 96 are indicated as V-
VOLs.
Format for P9500, XP24000/XP20000, or XP12000/XP10000/SVS200
When creating a single LU:
hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number
groupnum=parity-group-number|arraygroupname=parity-group-name}
capacity=capacity-of-the-logical-unit [emulation=emulation-type]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
[format={none|normal|quick
#
}] [capacitytype={KB|block}]
When creating multiple logical units in bulk by specifying their capacity and number:
hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number
groupnum=parity-group-number|arraygroupname=parity-group-name}
[fsindex=index-number-of-region-of-unused-capacity] creationoption=bulk
capacity=capacity-of-the-logical-unit
numoflus=number-of-logical-units-to-be-created [emulation=OPEN-V]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
[format={none|normal|quick
#
}] [capacitytype={KB|block}]
When creating multiple logical units in bulk by specifying their capacity:
hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number
groupnum=parity-group-number|arraygroupname=parity-group-name}
[fsindex=index-number-of-region-of-unused-capacity] creationoption=dividebycap
capacity=capacity-of-the-logical-unit [emulation=OPEN-V]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
[format={none|normal|quick
#
}] [capacitytype={KB|block}]
CLI Reference Guide 57