Setup guide

EUCON Application Setup Guide24
Flip to Faders (MC Mix)
Flipping the plug-in's parameters from knobs to faders allows changing eight parameters simultaneously. Flipping bus sends to
faders makes it easier to send multiple signals to an effect and better controls effects textures in your mix.
1 Select a track on the Artist media controller.
2 Press the INSERTS knobset selector (MC Mix) or the INSERTS Knob Top (MC Control).
3 Press a Knob Top to open a plug-in.
4 Press the FLIP key to flip the knobs to the faders.
You can now control the plug-in on the faders.
5 Press the FLIP key to flip the faders back to the knobs.
6 Press the BACK key to close the plug-in.
Flip also works for sends, pan, DYN (dynamics plug-ins), and EQ.
Wheel Edit Modes (MC Control)
Using the Jog Wheel instead of the mouse is a faster way to trim head and tail of a region, fade a region in and out, and adjust
gain.
1 Select a track on the Artist media controller.
2 Select an audio region on the track.
3 Zoom in to the region using the Jog Wheel.
4 Page down twice on the Softkeys.
5 Select Fade In.
6 Use the Jog Wheel to select the fade in region.
7 Repeat using gain, fade out, move.
Create and Control Surround Panner
Using knobs and faders without looking at the screen to control the balance of your surround mix allows you to remain more en-
gaged with your mix.
1 Create a 5.1-channel bus in the project.
2 Press the MIX knobset selector (MC Mix) or MIX Knob Top (MC Control).
3 Select 5.1.
4 Press the BACK key to exit.
5 Press the Pan knobset selector (MC Mix) or Pan Knob Top (MC Control).
You can now control the surround panning.
6 Press the BACK key to exit