Quick Reference Guide

NOTE: The asterisk indicates that the device is enabled in the

BIOS.

Applicable Systems All PowerEdge systems.

--OneTimeHddSeqDev

Valid Arguments

• On systems prior to 12G

:NA

• On 12G and later systems

: numerical list separated by commas or list of device names

separated by commas

Description

Determines the one-time boot hard disk when the One-Time Boot

Device List is set to BIOS Hard-Disk Drive Sequence Device. If Boot

Mode is set to UEFI , the system temporarily switches the Boot Mode

to BIOS when attempting a one-time boot to the device.

Example:

A:>syscfg --OneTimeHddSeqDev= 2,3,4,5,1,6

The following devices are set in the boot sequence:

Device 2:* usbcdrom.slot.1- USB CD-ROM device

Device 3:* virtualcd.slot.1 – VIRTUAL CDROM

Device 4:* hdd.emb.0 -Hard drive C:

Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500

Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY

Device 6:* usbfloppy.slot.1 - USB Floppy device

NOTE: The asterisk indicates that the device is enabled in the

BIOS.

Applicable Systems

PowerEdge 12G and later systems.

--OneTimeUefiBootSeqDev

Valid Arguments

• On systems prior to 12G

:NA

• On 12G and later systems

: numerical list separated by commas or list of device names

separated by commas

Description

Determines the one-time boot device when the One-Time Boot

Device List is set to UEFI Boot Sequence Device. If Boot Mode is set

to BIOS, the system temporarily switches the Boot Mode to UEFI

when attempting a one-time boot to the device.