Reference Guide

: min, max, osdbpm, systemdbpm

• On 12G and later systems

: MaxPerf, MinPwr, SysDbpm, OsDbpm

Description

Sets CPU Power Management to maximum performance, operating

system DBPM, or System DBPM (DAPC).

NOTE: The cpupowermode option is a sub-option of Power.

Example:

A:>syscfg --ProcPwrPerf=OsDbpm

ProcPwrPerf=OsDbpm

Applicable Systems All PowerEdge systems.

--ProcTurboMode/--turbomode

Valid Arguments

• On systems prior to 12G

: enable, disable

• On 12G and later systems

: Enabled, Disabled

Description

Enables or disables core-based turbo mode. Turbo mode is a feature

on Intel processors that allows one processor core to increase the

frequency by one bin whenever the other core has gone into an idle

state. When enabled, the processor can operate in Turbo Boost

Mode.

Example:

A:>syscfg --turbomode=enable

--turbomode=enable

Applicable Systems PowerEdge 11G and later systems running on Intel processors

--SysProfile/--profile

Valid Arguments

• On systems prior to 12G:maxperformance, osctl, apc, custom

• On 12G and later systems

: PerfPerWatt OptimizedOs, PerfPerWatt OptimizedDapc,

PerfOptimized, Custom, DenseCfg Optimized

Description

Configures the system power profile. When set to a mode other than

custom, BIOS will set each option accordingly. When set to custom,

you can change setting of each option.

NOTE: On systems prior to 12G, profile is a sub-option of power.

Example:

A:>syscfg --SysProfile=PerfPerWatt OptimizedOs

SysProfile=PerfPerWatt OptimizedOs

Applicable Systems All PowerEdge systems