X25AM Programming Manual

Diagnostic Codes for X25AM
X25AM Programming Manual—527201-001
B-2
Restart Diagnostics
Restart Diagnostics
Reset Diagnostics
00/00 Line was started with SCF or CMI START.
11/17 Restart Confirmation packet while in state R1.
12/18 Restart Confirmation packet while in state R2 (DCE).
Call Accepted, Call Request, Data, Interrupt, Interrupt
Confirmation, Clear, Clear Confirmation, Reset Confirmation, RR,
RNR, or Reject packet with LCN less than or greater than 0 while
in state R2 (DCE).
13/19 Restart Confirmation packet while in state R3 (DTE).
Call Accepted, Call Request, Data, Interrupt, Interrupt
Confirmation, Clear, Clear Confirmation, Reset Confirmation, RR,
RNR, or Reject packet with LCN less than or greater than 0 while
in state R3 (DTE).
21/33 Unknown packet with LCN less than or greater than 0 while in
state R3 (DTE) or R2 (DCE).
26/38 Reset or Restart Confirmation packet too short while restarting the
line in state R2 (DTE) or R3 (DCE).
27/39 Reset or Restart Confirmation packet too long while restarting the
line in state R2 (DTE) or R3 (DCE).
29/41 Reset or Restart Confirmation packet with LCN less than or
greater than 0 while in state R2 (DTE) or R3 (DCE).
30/48 T20/T10 timeout occurred.
34/52 T20/T10 timeout occurred waiting for restart indication.
C0/192 State table error.
00/00 CPU or CIU switch while in state P4.
01/01 Invalid P(S).
02/02 Invalid P(R).
1B/27 Reset Confirmation packet while in state D1.
1C/28 Packet is invalid for state D2 (DCE); the DTE did a reset and then
sent data or some other invalid packet type.
1D/29 Packet is invalid for state D3 (DTE); the DCE did a reset and then
sent data or some other invalid packet type.
21/33 Unknown packet while in state D1.
23/35 Packet type not allowed on a PVC.
26/38 Reset packet too short (less than 4).