OSI/FTAM Programming Reference Manual

NonStop FTAM Initiator Error Messages
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
B-23
FTAM Initiator Error Codes
-6003
Cause. On the FTM_CREATE_REQ_ or FTM_SELECT_REQ_ procedure, you
specified a requested-access action that was not supported or inconsistent with the
functional units negotiated when the association was established.
Subcodes. See Table B-9 to identify the action that was not supported or inconsistent
with the actions permitted for the document selected. Only the subcode of the first
reported inconsistency is displayed.
Effect. The initiator rejects your request.
Recovery. Determine if the inconsistency is in the functional unit or the requested
access. If the requested access is incorrect, reissue the create or select request with a
valid requested access.
FTM_FILE_OPEN_REQ_ Grouping, read, or write
FTM_LOCATE_REQ_ File access
FTM_OPEN_REQ_ Read or write
FTM_READ_ATTRIB_REQ_ Limited file management
ZFTM-ERR-ACCESS-INCNSTNT
Table B-9. File-Access Subcodes
Constant
(ZFTM-ERR-ACCESS-) Value Meaning
READ -1 Read access
INSERT -2 Insert access
REPLACE -3 Replace access
EXTEND -4 Extend access
ERASE -5 Erase access
READ-ATTR -6 Read-attribute access
CHNG-ATTR -7 Change-attribute access
DELETE -8 Delete access
Table B-8. Functional Units Required for Create, Change-Attribute, and Begin-
Group Services (page2of2)
Procedure Functional Unit Required