Server Management Guide

Scenarios and Best Practices
112 Intel
®
Server Boards and Server Platforms Server Management Guide
contains two targets - dnsendpt1 and remotesap1. The supported properties and supported verbs of the
Ipendpt1 are as follows.
5.7.10.1 Supported Properties
The supported properties of the ipendpt1 target are as follows:
Table 22. Ipendpt1 target
Property
Task
Ipaddress
The value of ipaddress is the IP address of the SP.
An IP address (Internet Protocol address) is a unique address that is used to identify and
communicate with each other on a computer network utilizing the Internet Protocol standard
(IP). This is an R/W property.
The value setting to the ipaddress affects the IP of the SP.
->set ipaddress=10.0.4.79
This will change the ipaddress of the sp. After changing, use committed property to save.
Subnetmask
This is the value of the subnetmask of the SP. A subnetmask is a range of logical addresses
within the address space that is assigned to an organization. This is an R/W property. The value
setting to the ipaddress affects the IP of the SP.
->set subnetmask=255.255.248.0
This will change the subnetmask of the sp. After changing, use committed property to save.
Usedhcp
Dynamic Host Configuration Protocol (DHCP) is a protocol used by networked devices to
obtain various parameters necessary for the networked devices to operate in an Internet
Protocol(IP) network. This property has two values(1 for DHCP and 0 for Static). This is a R/W
property.
->set usedhcp=1
Committed
Once the ipadress or subnetmask is set to 1, the property saves all the changes made. In addition,
the network settings also change and network connection is lost.
->Set commited=1
Identity
This read only property gives a brief explanation of the present target and cannot be changed.
5.7.10.2 Supported Verbs
The supported verbs of the Ipendpt1 target are as follows:
Verb
Is used to
cd
Change from one valid target path to any other valid target path.
exit
Exit from the current SMASH* session.
help
Provide information on using SMASH*.
set
Set the r/w supported properties
show
Show all the targets, properties, and verbs supported by this target.
version
Show the current version of SMASH*.