Server Management Guide

Scenarios and Best Practices
118 Intel
®
Server Boards and Server Platforms Server Management Guide
Figure 71. REMOTESAP2 Target
5.7.15 Account
The account target represents user accounts. It does not contain any targets.
5.7.15.1 Supported Properties
The supported properties of the target account are as follows:
Table 28. Target account
Property
Task
userid
This read only property defines the unique id for each user.
username
This property gives the usermname of a particular account. This is settable except for
userid=1. Username Length must be more than 1 character and less than 16 characters.
->set username=sdf
pmilanprivileges
This property gives the ipmi lan privileges. It can be set except for userid=1. Only
numbers are allowed.
->set ipmilanprivileges=4
password
This property gives the password of a particular user. It can be set xcept for userid=1;
password length should be less than 16 characters.
->set password=ssd
enabledstate
This property shows the state of the user. This property is settable except for userid=1.
Use 0 for disable and 1 for enable.
For example to enable the user set the value of this property to 1
->set userid=1
For example to enable the user set the value of this property to 1
->set userid=1