Owner manual

Cycle Segment Charts (continued)

Programming

Details

Use Up or Down to change. Start key is enter or advance

00 or 02-30 Segment time: 00 to skip, or any time between 0 and 30 min

HFIL CFIL BFIL Fill temperature: Hot, Cold, or Warm (both fill)

LOLE ndle or HILE Select Fill level, Low Med or High

SUP0 - SUP7 Select Supply 0-7 (0 for no supply during the step)

00, 75 - 200

00,25-93

SPIN flases for 1 sec

TIME flases for 1 sec

02-10 Selecttimeforspin: 2to10minutes

Note: Heat is only available if enabled in Setup

Enter temperature: 75-200 deg F, 25-93 deg C. 00 for no heat.

Select 00 if you have programmed a Flushing Prewash

Note: Supply 4 and 7 are only availble if enabled in Setup

Fill 6 Segment

Display

fil6