Getting Started Guide

• TCP/IP protocol and node name resolution enabled
To install remotely, from the Cell Manager GUI:
NOTE:
To install the clients remotely, you need and Installation Server in your cell. If you
used the default values during the Cell Manager installation, than the Installation
Server is already installed on the Cell Manager system.
1. Log on to the system as Administrator
2. Start > Programs > Hewlett Packard > HP Application Recovery Manager
software > Application Recovery Manager
3. In the Application Recovery Manager GUI, switch to the Clients context.
4. In the Scoping Pane, right-click Clients and select Add Clients to start the
wizard.
5. Follow the wizard.
To install locally, on the target system:
Windows
1. Log on to the system as Administrator.
2. Verify network connection between the Cell Manager system and the client
system by running the following command:
ping CellManagerHostname
3. Run:
32-bit processors: \i386\setup.exe
AMD-64/Intel EM64T processors: \x8664\setup.exe.
Itanium processors: \ia64\setup.exe.
4. Select the Client and follow the instructions.
5. In the Cell Manager system window, enter the name of your Cell Manager.
Page 5