Configuration Guide User guide

FastIron Configuration Guide 305
53-1002494-02
Brocade IronStack management
up ports: 4/2/6, 4/2/7, 4/2/8, 4/2/9, 4/2/10
5 up (5/2/1-5/2/5) up (5/2/6-5/2/10)
up ports: 5/2/1, 5/2/2, 5/2/3, 5/2/4, 5/2/5
up ports: 5/2/6, 5/2/7, 5/2/8, 5/2/9, 5/2/10
6 up (6/2/1-6/2/5) up (6/2/6-6/2/10)
up ports: 6/2/1, 6/2/2, 6/2/3, 6/2/4, 6/2/5
up ports: 6/2/6, 6/2/7, 6/2/8, 6/2/9, 6/2/10
7 up (7/2/1-7/2/5) up (7/2/6-7/2/10)
up ports: 7/2/1, 7/2/2, 7/2/3, 7/2/4, 7/2/5
up ports: 7/2/6, 7/2/7, 7/2/8, 7/2/9, 7/2/10
Syntax: show stack stack-ports
Table 51 describes the output from the show stack stack-ports command.
Displaying running configuration information
The show running-config command displays information about the current stack configuration.
Brocade(config)# show running-config
Current configuration:
!
ver 05.0.00T7e1
!
stack unit 1
module 1 fcx-24-port-management-module
module 2 fcx-cx4-2-port-10g-module
module 3 fcx-xfp-1-port-10g-module
stack-port 1/2/1 1/3/1
stack unit 2
module 1 fcx-48-port-management-module
module 2 fcx-xfp-2-port-10g-module
stack unit 3
module 1 fcx-48-port-copper-base-module
module 2 fcx-xfp-1-port-10g-module
module 3 fcx-cx4-1-port-10g-module
stack unit 4
module 1 fcx-48-port-copper-base-module
module 2 fcx-cx4-1-port-10g-module
module 3 fcx-xfp-1-port-10g-module
priority 128
stack enable
!
For ICX devices, with stacking enabled, for example:
stack unit 1
module 1 icx6610-24p-poe-port-management-module
module 2 icx6610-qsfp-10-port-160g-module
TABLE 51 Field descriptions for the show stack stack-ports command
Field Description
ID The stack identification number for this unit
Stack-port1 Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)
Stack-port 2 Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)