Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 93
Help With the omconfig Command
Use the omconfig -? command to get a list of the available commands for
omconfig.
Use omconfig <command level 2> -? to get help on the about, chassis,
preferences, and system’s level 2 commands. The following information on
omconfig system -? applies equally to getting help for the omconfig chassis
command.
Use the omconfig system -? command to get a list of the available commands
for omconfig system.
Use the omconfig preferences -? command to get a list of the available
commands for omconfig preferences, such as cdvformat, which is the custom
delimiter format (cdv.) Type the following command to display the list of
delimiter values for the cdv:
omconfig preferences cdvformat -?
Use a command of the form omconfig system <command level 3> -? to get a
list of the parameters you must use to execute a particular omconfig system
command. For example, the following commands produce a list of valid
parameters for omconfig system alertaction and omconfig system shutdown:
omconfig system alertaction -?
omconfig system shutdown -?
In case of the omconfig system alertaction command, you can use various
options to prevent all of the command line interface (CLI) help from
scrolling, before you can read it.
storage See "Using the Storage
Management Service" on
page 191.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3 (continued)
Command
Level 1
Command Level
2
Command Level 3 User
Privilege
Required
Use