Instruction Manual

MicroShockDetector plus
- 38 -
Figure 30: Brief overview after reading out the device
The brief overview shows, among other things, the estimated remaining runtime of the
MicroShockDetector plus. It also shows whether and which alarms have occurred.
The buttons on the readout screen offer the following functions:
OPEN
The status report created by the MicroShockDetector plus is displayed. The read out data is shown
in table form. For a detailed explanation of all displayed values, see section 4.3.2 Measurement
data, status and thresholds. The status report can be shared using the button .
SEND EMAIL
An email is sent to all selected email addresses stored in the app. The email sent contains the status
report in PDF format and the read out data as an .msd file. The .msd file can be opened with the
MONILOG
®
Analyzer software (see section 4 PC Software – MONILOG
®
Analyzer).
STORE FILE
The status report is saved in the download folder of the internal phone memory. The authorization
to access the smartphone's memory is required to save the file. If the app does not yet have
authorization for this access, the authorization will be queried when you click.