Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
7
1.3. CONFIGURATION
The INZennio Z38 includes 217 Communication Objects responsible to transmit and
receive data through the BUS.
To begin with the InZennio Z38 module configuration, it will be necessary to import in
ETS, a project that contains an InZennio Module of the device, or a database .vd file of
the product (See www. Zennio.com)
This manual starts from the "default" product configuration, to gradually configure the
device according to the user requirements.
o Default Z38 Panel Configuration (Communication Objects)
To make Communication Objects working easier, as well as to facilitate its
understanding, these have been reorganized as selected by parameters.
The Communication Object arrangement has been also substantially improved by
ordering them alphabetically by sections on the ETS.
Note:
For this arrangement to be effective, it is necessary to click on the “NAME”
column, instead of the “NUMBER” one.
o Parameters will be shown as they appear initially
In order to visualise and configure the parameters of an ETS device, click the right-
mouse button on the BUS device you want to configure, then click left-mouse button on
“Edit Parameters”.