Programming instructions

Programming Power Block settings
35
The Tunnel mode settings window displays.
4. Click and drag the slider up or down. To adjust by smaller, 0.1-degree increments, click the slider
and then press UP or DOWN on your keyboard.
5. Click Close to return to the Ventilation settings window.
6. Click OK to save the changes and return to the Settings window.
Programming ventilation curves
As animals grow, their temperature and ventilation requirements change. Younger, smaller animals
require higher temperatures than more mature animals. More mature animals require more
ventilation (airflow) than younger animals.
Select Ventilation has two types of ventilation curves, master set point curves (also called growth
curves) and minimum ventilation curves. Both the master set point and minimum ventilation curves
allow you to automatically adjust settings over time, as your animals grow.
Master set point curves
A master set point curve is an extension of the master set point concept. The curve automatically
adjusts the master set point temperature over time.
In hog production, newborn piglets require a high temperature for comfort and health. As they grow
older, they need a steadily lower temperature. Using the master set point curve, you can have Select
Ventilation automatically adjust the temperatures as the animals grow.