Programming instructions

Programming Power Block settings

The Ventilation growth curves window is where you program ventilation curves.

A This button opens the Growth Curve cloning window, which is where you can copy the curves from

another Power Block

B This is where you enable or disable curves. When enabled, there is a checkmark in the box

beside the curve. The text color corresponds to the color on the chart. The information on the

right is the setting for the current day.

C This is the curve length and current day; both values apply to all curves for the Power Block. To

change either value, type a number in the box or click Up or Down beside the item you want to

change.

D This is where you adjust the points on the curves. The chart shows colored lines and dots for the

enabled curves. The vertical orange line shows the current day. The left axis is for the master set

point curve and the right axis is for the minimum ventilation curves.

E This button allows you to smooth or draw a straight line between two points.

F This button allows you to cancel the smoothing process before it completes.

Tips for working with curves

 Left-click any point to display its setting. Click Up or Down to adjust the setting.