Programming instructions

Programming equipment settings

5. Adjust the settings.

 To adjust the set point, click and drag the slider up or down. To adjust by 0.1-degree

increments, click the slider and then press UP or DOWN on your keyboard.

 To adjust an on or off duration, click and drag its hour, minute, or second number up or

down. You can also click the number and then press UP or DOWN on your keyboard.

6. Repeat steps 4 and 5 for each relay you want to program.

7. Click OK to save the changes and return to the Settings window.

Programming timed events

Timed event relays control equipment such as lights that need to be switched ON or OFF during

certain times of the day. Programming timed events means setting the on and off times.

Timed events must be paired. In other words, every time you set a relay to switch on, you must set a

time for it to switch off.

Before setting up the timed events, make sure you have properly configured the relays. For more

information, read Configuring relays for timed events on page 26.

The Timed event settings window is where you program timed events.