HP Matrix Operating Environment 7.3 Update 1 Installation and Configuration Guide for Provisioning with Virtual Resources

DescriptionName
Verifies if at least one network is properly configured in
infrastructure orchestration for provisioning with minimum
required parameters
IO Network Configuration
Checks for the availability of resources on infrastructure
orchestration User Pools (virtual and physical)
IO User Pools Configuration - Resources Availability
Checks if there are users assigned to the infrastructure
orchestration pools
IO User Pools Configuration - Users Assigned to Pools
Checks available infrastructure orchestration workflows
configured in Operations Orchestration
Operations Orchestration Workflows Configuration
Checks if virtual software customization is properly
configured for automatic operating system deployment
Virtual Software Customization
Checks if there are published and valid infrastructure
orchestration templates
IO Template Available and Published
Checks if there are Storage pools available on each VCDG
for physical provisioning
Storage pools assigned to VCDG
Checks if there are available physical, virtual, and mixed
networks for provisioning
Available Networks
Checks if there are virtual and physical servers available
for infrastructure orchestration operations
Servers Availability
Verifies if deployment servers contain software for
automatic operating system deployment
Available Software
For each check performed, one of the following status indicators displays:
• PASS—No configuration issue was found.
• FAIL—A serious configuration problem was found, which must be resolved for correct operation.
• WARN—A configuration problem was found. The problem may not necessarily prevent correct
operation, but it may limit or restrict operation of some features.
• N/A—Not Applicable: the check does not apply to this type of system.
Service provisioning
For assistance on specific issues encountered during service provisioning, see the troubleshooting
information in the HP Matrix Operating Environment Infrastructure Orchestration User Guide.
Logical server features
For issues with the logical servers features in the HP Matrix OE visualization software, see the
troubleshooting information in the HP Matrix Operating Environment Logical Server Management
User Guide.
Troubleshooting procedures
Agent and communication troubleshooting
Install OpenSSH on Windows 2008 managed node through Configure or Repair Agents
fails
Issue
When using Configure or Repair Agents to Install OpenSSH onto a managed node with Windows
Server 2008 installed, the installation fails if you enable the UAC setting and you use a domain
138 Troubleshooting