HP VPN Firewall Appliances Network Management Configuration Guide

288
Configuring actions for the traffic behavior
1. Click the icon in the Operation column for the traffic behavior to be configured.
Figure 188 Configuring actions for a traffic behavior
2. Configure actions for the behavior, as described in Table 35.
3. Click Apply.
A configuration progress dialog box appears.
4. Click Close when the dialog box prompts that the configuration succeeds.
Table 35 Configuration items
Item Descri
p
tion
Behavior Name Name of the traffic behavior being configured.
CAR
CAR Configure CAR for data packets.
Enable/Disable Enable or disable CAR.
CIR
Set the CIR, the average traffic
rate.
For bursty traffic to be handled
effectively, make sure the ratio of
CBS to CIR is at least 100:16.
CBS
Set the CBS, number of bits that
can be sent in each interval.