Using the HP DTC Manager/UX

Conﬁguring terminal and printer ports

Configuring terminal and printer ports

Once a port has been conﬁgured, this conﬁguration can be copied and pasted to

other ports as described in chapter 9.

To modify several DTCs simultaneously, use the dtcmodifyconfs command as

described in chapter 10.

Note For the purposes of the procedures described in this chapter it is presumed that you

have added at least one DTC to the conﬁguration and that it has at least one board in

it. It is also presumed that you are familiar with the basic use of the dtcconfig menus

and function keys as described in chapter 4.

Any changes you make to the port parameters take effect immediately. You do not

need to download the DTC. However, if any terminal users connected to the DTC

are running sessions, they will not see the changes until they close the current

sessions and start new sessions.