Using the HP DTC Manager/UX

Conﬁguring a port

Configuring a port

1 Select Modify DTC Configuration from the dtcconfig main menu.

A pop-up window asks you for the name of the DTC whose conﬁguration you

want to modify.

2 Type in a DTC name or press F1 and select a DTC from the list of existing DTCs.

Press Return or the Select Item (F4) function key.

The DTC Rear Panel Conﬁguration screen appears.

3 In the Rear Panel Configuration screen, enter the board number to configure.

4 Use the arrow key to go to the port field and enter a port number according to the

DTC type:

• 0 through 15 - direct connect or modem ports for DTC 16TN

• 0 through 7 - direct connect ports for DTC 16 and DTC 48

• 0 through 5 - modem ports for DTC 16 and DTC 48

• 0 through 23 - direct connect or modem ports for DTC 72MX

5 Press the Action Menu (F5) function key and select one of the listed tasks.

You are taken to the appropriate screen to enter new port values. The screen and

the information you provide for each task varies depending on the type of board

(direct-connect or modem) and type of port (printer or terminal) you have

chosen to conﬁgure.

The port conﬁguration screen displays the current defaults being used. The

Conﬁgure Port screen and Enable Port Options screen allow you to choose

HP Defaults, User Defaults, or enter other values.

The screens are described in the rest of this chapter.

6 When you have finished making your changes, return to the Rear Panel

Configuration screen.

7 You can configure another board and port or press F8 to exit the Rear Panel

Configuration screen and return the dtcconfig main menu.