User Guide

44
9. In the PORT INFO window that appears, click into the number field next Ext. Port to change it to
the same port number that was chosen in step 2 above (e.g. 12345). Then click OK.
10. Now, click Apply, and ensure it says ‘Searching’ in the field next to UPnP Status.
11. Exit this menu to go back to the main menu, then re-enter the UPnP menu, and ensure the UPnP
Status says ‘Success’.
Note: If this does not say ‘Success’, try resetting the DVR, then your router. If it still does not
work, it may be because your router does not support UPnP. In this case, you will need to port