Installing MS BackOffice Small Business Server 4.x

6. Select <S> to continue.

7. Insert diskette #3 when prompted.

8. Press <Enter> to continue.

9. Press <S> to specify additional device.

10. Select <Other> and press <Enter>

11. Insert the Windows NT 4.0 driver's diskette at the prompt that reads "Please insert the

diskette labeled Manufacturer - supplied hardware support disk into drive A:"

12. Press enter to continue.

For NetServer E 60 select “Hewlett-Packard 2940/78xx SCSI driver..” and press

<Enter>.

For NetServer E800 select “HP NetServer E800 embedded SCSI driver, Symbios

Logic (53C8xx)”. And press <Enter>.

13. Press Enter to finish the device configuration and continue with the installation.

14. Insert diskette 3 and follow the instructions provided on the screen by the installer.

15. If SBS CD-ROM disk1 is not mounted you will be asked to mount it now.

16. Verify system configuration: Keyboard, Mouse etc.

17. Select <The above list matches my computer> Press <Enter>.

18. Partition disk as needed. Please note that SBS requires a lot of free space for

additional products. It is recommended that you create all drive partitions required

now. This will prevent having to change the CD-ROM drive letter after the

installation is completed.

19. If prompted, Insert the <"Hewlett-Packard 2940/78xx SCSI driver…"> diskette.

For NetServer E800 insert “HP NetServer E800 embedded SCSI driver, Symbios

Logic (53C8xx)” diskette.

20. Select the target partition for the installation and press <Enter>.

21. Choose <Format NTFS>.

Note: SBS 4.5 requires NTFS.

22. Setup begins to copy files to your hard disk.

23. When prompted insert the HP NetServer Driver diskette created with the Navigator

used in step 11.