Installing MS BackOffice Small Business Server 4.x

Tip #4: "BOOT: Couldn't find NTLDR" error message

If your system does not boot, and the screen displays an error message "BOOT: Couldn't

find NTLDR," remove the Windows NT CD-ROM from the drive and reboot the system

again.

Tip #5: Exception access error when changing the default IP address

when adding a NIC driver

When installing the product you may get a Dr. Whatson Exception access violation

(0xC0000005) in RUNDLL32.EXE after doing the following steps.

1. Add the NIC driver.

2. View Binding.

3. Change IP Address to proper number.

4. Change Primary and secondary Wins IP address.

It is recommended to complete the installation with the default IP address and change it

after the installation completes.

Tip #6: Installing SBS 4.5 on the E 800

HP recommends you use the automated installation procedure with the HP Navigator

CD-ROM as listed on the document.

NOTE:: Installation by booting from SBS 4.5 CD-ROM media is not supported.

Problem: SBS 4.5 has a ATI driver which does not work properly during the GUI

portion of the Setup program. The system displays multiple color boxes with unreadable

information.

Solution: Modify the unattended control file WINNT.SIF on diskette #2 to program the

ATI driver for VGA resolution.

After installation completes follow normal NT procedure to install the ATI video driver

created from the HP NetServer Navigator CD-ROM.

Steps to update SBS 4.5 diskette #2

1. Make a copy of SBS 4.5 diskette #2. Label it New Diskette #2.

2. Remove the “read-only” attribute from the WINNT.SIF file (Attrib –R WINNT.SIF)

3. Use the Notepad or any text editor to open WINNT.SIF on the copy diskette.