Installing MS BackOffice Small Business Server 4.x

24
You may change these parameters now if needed. It is recommended to complete the
installation with the default and change them later.
52. Click <Yes>. To restart system now.
53. Click <Window Minimize Button_>. This is the symbol on top right of the windows
frame to move the wizard to the task bar the wizard.
54. Close or hide the control panel application.
55. Notice that the “Display Properties” application is running in the background.
56. Click <OK>. At the invalid display setting dialog box.
57. Click <Display Type>.
58. Click <Change>.
59. Click <I have a disk>.
60. Insert the <Hewlett Packard driver diskette 2> This diskette has the video driver.
61. Type <a:\video>.
62. Select <ATI 3D Rage IIC AGP>. (This is the default selection)
For E 800. Select<ATI Rage XL PCI>
63. Click <OK>.
64. Click <Yes> at the third party dialog box.
65. Click <OK>. At the dialog box that reads “Drivers were successfully installed”.
66. Click <Close>. To close the advanced video section.
67. Click <Close>. At the display configuration panel.
68. Remove diskette from the floppy drive.
69. Click <Yes>. To restart system now.
70. If present, Click <OK> at the "Service control manager" dialog box.
71. The system comes up with the setup wizard. Click <Next>. At the modem install
panel.
72. Click <Yes>. To accept that there is no modem.