Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
12
Support Notes
Release WS.02.07
3. Select the Cache tab.
Figure 9. Java Plug-in Control Panel
4. You are prompted to confirm clearing the cache. Click the Yes button.
Figure 10. Java Plug-in Confirmation Needed Screen
5. Click the Apply button; then close the screen.
Restart the Browser
You are now ready to access the Wireless Edge Services xl Moduleβs Web browser interface:
1. Close and re-open your browser.
2. Enter the IP address (or hostname) of your Wireless Edge Services xl Module in the browser.
Click this
button