Installing MS BackOffice Small Business Server 4.x

A:> copy a:\7800\aic78xx.sys

c:\winnt.sbs\system32\drivers

Where "winnt.sbs" is the directory where you are installing the SBS product.

22. Remove the SCSI driver's diskette from the drive and press enter reboot the system.

23. The system will resume the NT Setup process. It will do a check disk and reboot the

system automatically.

24. The GUI installation part starts. Click "I Agree" to accept the license option and

follow the instructions on the display.

25. Enter user name, company and CD key.

26. Click OK at the Warning screen that reads "A setup parameter specified by your

system administrator.... "Detect Adapter" value is missing or invalid.".

27. Click OK at the Setup Message that reads "Remote access is not configured ..."

28. Click "Cancel" at the Error message that reads "The network failed to start

(0x0000042a)". This will enable us to continue the installation and configure

networking later on.

29. Configure the appropriate time zone. The system will auto-reboot.

30. Click OK at the "Control Manager Screen" warning that reads "At least one service or

driver failed during system startup ....". Also, click OK if you get an error about

creating Domain list.

31. Click OK at the "Invalid display setting" warning.

32. Select 640x480 pixels.

33. Click test, click OK, click yes to accept the new display settings.

34. Click OK at the "Windows NT setup "Warning that reads "The installation library

ocsam.dll component sam could not be initialized."

35. Click OK at the "Windows NT Setup" error panel that reads "Application could not

be initialized."

36. Now you should be at the NT main desktop.

Configuring the Embedded LAN Adapter

1. Shutdown system.

A. Power up system