HP StoreEver Command View for Tape Libraries (CVTL) v. 3.7 and Interface Manager Firmware v I274 Release Notes

The following network port is used by the Management Station to communicate with the Command

View TL database:

• 5450 (TCP) bidirectional (required for CVTL 3.5.00)

By configuring your firewall with respect to Management Station to allow communication through these

ports, the web browser you use to run Command View for Tape Libraries can be on the other side of

a firewall from your Management Station.

The following network ports are used by the Management Station to communicate with the Interface

Manager:

• 8098 (TCP) bidirectional in CVTL 2.8.00 or lower

• 8099 (TCP) inbound

• 18098 (TCP SSL) outbound

By configuring your firewall to allow communication through these ports, the Management Station can

be on the other side of a firewall from your library.

The Interface Manager requires the following ports to be open on the Management Station:

• 22 (TCP) inbound, SSH Access for CLI usage

• 25 (TCP) outbound, SMTP eMail client

• 53 (UDP+TCP) outbound, DNS client mode

• 67-68 (UDP) outbound, DHCP client

• 123 (TCP and UDP) bidirectional, to communicate with the NTP server

• 161 (UDP) bidirectional, to communicate with the SNMP trap server

MSL G3 libraries require the following ports to be open on the Management Station:

• 22 (TCP) inbound, for service and future diagnostic functions. This port can be disabled by the

admin if they choose.

• 80 (TCP) bidirectional, HTTP library is a webserver for administration purposes

• 161 (UDP) bidirectional, required to communicate with the ESL G3 library

• 162-169 (UDP) inbound, one port in the range required to receive the SNMP traps

• 427 (UDP+TCP ) bidirectional, SLP Service Locator Protocol

• 443 (TCP) inbound, HTTPS Secure Webserver

• 5696 (TCP) outbound, KMIP communication port on the server. Library uses a non privileged port.

ESL G3 libraries require the following ports to be open on the Management Station: