Digital Camera User Manual
Table Of Contents
- Getting the Most from Your Camera
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Still Image Mode
- Smart Photo Selector Mode
- Movie Mode
- Motion Snapshot Mode
- More on Photography
- More on Playback
- Connections
- The Playback Menu
- The Shooting Menu
- Reset Shooting Options
- Exposure Mode
- Image Quality
- Image Size
- Continuous
- Shutter Type
- Frame Rate
- Movie Settings
- Metering
- White Balance
- ISO Sensitivity
- Picture Control
- Custom Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR
- High ISO Noise Reduction
- Fade in/Fade Out
- Movie Sound Options
- Interval Timer Shooting
- Vibration Reduction
- AF-Area Mode
- Face-Priority AF
- Built-in AF Assist
- Flash Control
- Flash Compensation
- The Setup Menu
- Reset Setup Options
- Format Memory Card
- Slot Empty Release Lock
- Welcome Screen
- Display Brightness
- Grid Display
- Sound Settings
- Auto Power Off
- Remote on Duration
- Assign AE/AF-L Button
- Shutter Button AE Lock
- Video Mode
- Flicker Reduction
- Reset File Numbering
- Time Zone and Date
- Language
- Auto Image Rotation
- Battery Info
- Firmware Version
- Technical Notes

90
Q
Connect the camera to a television or video recorder for play-
back or recording.
Standard Definition Devices
Before connecting the camera, confirm that the camera video
standard (0 156) matches that used in the TV.
1
Connect the A/V cable.
Turn the camera off and connect the supplied audio/video
(A/V) cable.
2
Tune the television to the video channel.
3
Turn the camera on.
Turn the camera on and press K to view pictures on the TV
(note that the edges of some images may not be displayed).
The camera monitor will remain off; stereo sound recorded
with movies will be played back as monaural sound.
Viewing Pictures on TV
A
Connecting Video Cables
Always turn the camera off before connecting or disconnecting A/V or
HDMI cables. When connecting cables, do not use force or attempt to
insert the connectors at an angle.
A
Video Mode
If no image is displayed, check that camera is connected and that the
correct Video mode (0 156) is selected.
Connect to camera
Video (yellow)
Connect to
video device
Audio (white)