Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

10-20
Redundancy Groups
Configuring a Redundancy Group
Other fields in the Network Setup > Redundancy Group > State screen allow you
to monitor activity both on this particular module and throughout the group.
For example, you can compare the Unapproved Radio Ports on this module value
to the Unapproved Radio Ports in the group value to see whether this module’s
RPs seem to detect more rogue APs—a sign of a possible security issue in a
particular location of your network.
You can also check these fields:
■ Radios in group or Radios on this module—the number of radios adopted by
the group or by the individual module.
Because some RPs include two radios, these numbers may be greater than
those for the corresponding Radio Ports adopted by fields.
■ Self-healing Radios in group or Self-healing Radios on this module—the
number of radios adopted by the group or by the individual module that
are enabled for self-healing.
This field counts any radio that is enabled for self healing; the radio does
need to be currently taking self healing action.
■ Wireless Stations in group and Wireless Stations on this module—the number
of wireless stations associated to all RPs adopted by the entire group or
by this individual module.