Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

13-91
Wireless Network Management
Network Self Healing
You can configure the neighbors in one of two ways: manually or with
automatic neighbor detection.
Specifying Neighbors Manually
Keep these concepts in mind as you configure neighbors:
■ The neighbor relationship is reciprocal: if you configure a neighbor list on
radio 1 that includes radio 3, radio 3’s neighbor list automatically adds
radio 1. (See Figure 13-64.)
■ However, the relationship is not communicative: if radio 1’s neighbor list
includes both radio 3 and radio 4, radio 3’s list will include radio 1, but
radio 3’s list will not include radio 4 unless you explicitly configure radio 4
and radio 1 as neighbors.
■ You configure neighbors on a per-radio basis. That is, instead of configur-
ing a group of neighbors with certain members, you assign each radio a
list of neighbors.
To assign neighbors to a radio, complete these steps:
1. Select Special Features > Self Healing and click the Neighbor Details tab. In
the upper-right corner of the screen, verify that neighbor recovery is
enabled.
Figure 13-65.Configuring Neighbors