Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-96
Configuring the ProCurve Wireless Edge Services xl Module
System Maintenance
5. Choose the filename.
The path to the folder you have selected is displayed in the field at the
bottom of the screen. Files in this folder display to the right. You can select
one of these files and write over it, or you can choose a new file. To create
a new file, add the filename to the path in the field at the bottom of the
screen. For example: flash/myfolder/configA.
6. Click the OK button.
7. The path and filename that you have selected are displayed in the File field.
8. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
Deleting a Configuration File
From the Management > System Maint.—Config Files screen, you can delete any
configuration file that is stored in flash—except the startup-config file. To
delete a configuration file, complete these steps:
1. Select the configuration file and click the Delete button. As shown in
Figure 2-61, you will be prompted to confirm that you want to delete this
configuration file.
Figure 2-61. Confirm File Delete Prompt
2. Click the Yes button to delete the file.