Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-32
Configuring the ProCurve Wireless Edge Services xl Module
Management Interfaces
Setting Up the Internal FTP Server
The Wireless Edge Services xl Module includes an FTP server, which can send
files stored in the module’s flash memory to FTP clients. For example, you
could upload a configuration file directly from one module to another—
eliminating the middle step of transferring the file to an external FTP server.
The FTP server has these properties:
■ Port—The server listens on the standard FTP port, 21. You cannot alter
the port number.
■ Username—The default username is “ftpuser” and cannot be altered.
■ Password—The FTP client must submit the correct password to receive
the requested file.
■ Root directory—The Wireless Edge Services xl Module searches this
directory for requested files. You can specify the module’s entire flash
memory or a directory within the flash.
By default, the FTP server is disabled.
Follow these steps to set up the internal server:
1. Select Management > Web Access Control.
2. Check the Enable FTP box.