Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

A-71
ProCurve Wireless Services xl Module Command Line Reference
Wireless Commands
• interference-avoidance - Interference Avoidance configuration.
– enable - Enables/disables interference avoidance.
– hold-time - The number of seconds to disable interference avoidance
after a detection. This prevents a radio from changing channels contin-
uously.
+<0-65535> - A number of seconds between 0-65535.
– retries - The average number retries to cause a radio to re-run auto
channel selection.
+WORD - A decimal number between 0.0 and 15.0.
• neighbor-recovery - Neighbor recovery configuration commands.
– action- Ra di o s elf hea li ng acti on when neighbors are detecte d
down.
+both - Raise the power to max and open all rates.
+none - Do nothing.
+open-rates - Open all rates.
+raise-power - Raise the power to max.
– enable - Mo nitor r adio-p or ts and attempt to i ncrease c ov er age
on failure.
– neighbors - Add radios as neighbors.
+<1-1000> - A single radio index.
-<1-1000> - A single radio index.
– run-neighbor-detect - Disassociate all stations, clear current neigbors
and run neighbor detection.
Default Setting
N/A
Command Mode
Wireless Configuration