Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

4-17
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
To modify the default configuration using advanced mode, complete
these steps:
1. Select Network Setup > Radio Adoption Defaults and click the WLAN
Assignment tab.
Figure 4-10. Customizing WLAN Assignment for the Radio Adoption Default
(Advanced Mode)
2. Choose the radio type from the Select Radio drop-down menu.
Note If your network includes radios of both types, you should remember to
configure a default WLAN assignment for each. Typically, these assign-
ments should match.
You can assign WLANs to the radio as a whole or to individual BSSIDs.
3. Check the Assign box for each WLAN that you want to assign to the radio,
and then click the Apply button.
4. If you want to assign a specific WLAN to a specific BSSID number, or if
you want to choose the primary WLAN, complete steps 5 through 8.